DPT-R8

DIFFERENTIAL PRESSURE TRANSMITTER

THREE-WIRE

wp4628172-hvac-wallpapers_edited.jpg
DPT.png

DPT-R8 The DPT-R8 series includes electronic differential pressure transmitters that offer exceptional performance, high quality and competitive pricing. Because of the high accuracy of the devices, it is usually not necessary to narrow down the range to get precise measurements. DPT-R8 devices are easily customizable, and also available for private labelling.

 

USAGE & APPLICATIONS

The differential pressure transmitter is used for measuring low pressures of air and non-combustible gases in order to monitor and control building automation, HVAC and cleanroom systems.

Technical Specifications

Accuracy (from applied pressure: 
(models 250 and 2500)

Accuracy (from applied pressure):
(model 7000)

Zero point calibration:

Measuring units:

Supply voltage:

Power consumption:

Output signals (3-wire):

Operating temperature:

Response time:

Protection standard:

Pressure < 125 Pa = 1 % + ±2 Pa

Pressure > 125 Pa = 1 % + ±1 Pa

Pressure > 125 Pa = 1.5 % + ±1 Pa

Pressure < 125 Pa = 1.5 % + ±2 Pa

automatic with autozero element (-AZ) or by pushbutton

Pa, kPa, mbar, inchWC, mmWC, psi

24 VDC ±10 % / 24 VAC ±10 %

< 1.0 W (< 1.2 W with output current 20 mA)

-40 °C model: <4.0 W when <0 °C

0…10 VDC, Load R minimum 1 kΩ

4…20 mA, maximum load 500 Ω

-20…+50 °C (with autozero calibration -5...+50 °C)

-40…+50 °C (-40C model)

0.8 / 8 s

IP54